Batteries Bilge Bilge Pumps Blog Bow Pulpit Bow Thruster Bulkheads Cabinets Cable Master Canvas Cockpit Construction Coosa Deck Deck Hardware Design Dinette Distributed Power Driveline Electrical Electronics Engine Engine Room Equipment Exterior Fiberglass Finish Work Floors Fuel System Fun Gadgets Galley Hard Dodger Head Heating and Air Conditioning Ice Box Ideas Insulation Interior Keel Lighting Main Salon Mastervolt Masts Materials Mechanical New Technologies Off Topic Paint Panel Philosophy PlasTeak Plumbing Portlights Ramblings Rigging Rudder Sailplan Sails Sanitation Steering Tanks Techniques The Other Boat The Shop Thru-hulls Tick Stick Tools V-Berth Welding Wiring Wood
Thursday, April 07, 2005
Washing the Inside of the Hull
Took a garden hose/sprayer to the inside to get the loose bits of dirt out. Much of it came off easily. The pressure washer should do fine. Pulled up the forward factory installed floor. Took a look at the timbers. Looks like some of them have some rot. And, the fiberglass tabbing is not adhering well. The timbers will likely need to be replaced.