Follow This Project On Facebook

Lately I have just not had time to post updates to this blog. I do post activity on this project more frequently on Facebook. If you are interested in whats happening, I encourage you to click 'Like' on the Facebook badge below. Or go to

Posts to this blog will happen infrequently, if at all. The blog will remain accessible for historical purposes.

Monday, July 29, 2013

Mast Step Repair, Part 2

Smoothed and leveled the newly laid glass with a grinder to prepare for final surface glass and fairing.
Mast step smoothly ground.
Next, a fiberglass tube thru-deck for the main mast gadget wiring. Before laying the bulk glass, I had cored the mast spot with some discs of Coosa board. Installing the conduit was a matter of cutting a hole and setting the tube with thickened epoxy. No need to rabbet and seal the plywood core.
Thru-deck conduit.

No comments: